If you want to be able to move the curtain panel back-and-forth across the entire rod, the last grommet should be inside the bracket.

Add Blackout Lining To Existing Curtains | Blackouts How To Add Blackout Lining To Existing Curtains | Blackouts

It’s easy to transform any pair of standard curtains into blackout curtains with our ready-made blackout curtain linings. There are ways to personalise how the curtains are hung, too, such as using tie cords and hooks to tie them back. If you have pets, then allow at least 1" because they rub into the curtains and sometimes lay right by them, thus making it easy for them to pull down the curtain/s. Not all curtains have this, but if yours does, tuck the excess fabric into the curtain to that it rests against the wall.If you don’t have curtain rod brackets already, use wall anchors to secure them to your wall before hanging your curtains.

How to Hang Curtain Linings | Dunelm

Considering the densely packed folds that span the entire length of the curtain, it will need to be much longer than if the fabric were taut. When you get to the end, position the final eyelet hole on the outside of the pole bracket - this will stop your curtains from falling or pulling into the middle of the pole when you pull them.If possible, spread a measuring tape above the curtain heading to monitor the breadth as you pull the cables tighter. They're cheap and can prevent you from mistakenly hanging the curtains without a stud to support them. Watch our how-to video to help you get your new look or use the following steps and tips as guidance. If you can't iron or steam the curtains, drape the curtains across your bed for several hours up to an entire day.

How to hang curtains - Yours How to hang curtains - Yours

If the curtain has an odd number of eyelets, the edges of the curtain won't lay properly against the wall. Make sure the curtain has a hook at either end and space the remaining hooks four to five pockets or pleats apart. Because of this, maintaining pencil pleat curtains might be a little more challenging than maintaining eyelet curtains. Once the brackets are set up, all you have to do is unscrew the stopper on one end of the curtain rod, slide the rod through the grommets, and screw the stopper back in place.If you did not loosen the cords and flatten the heading tape in step 1, unfasten the cords at one end of both curtain and lining, and knot them securely together. Holding the strings at the end, you didn't tie up; carefully draw the curtain's top tape until it is the proper breadth before tying up the final set of threads. If there are visible folds from the packaging, gently iron them after checking the care label for temperature instructions. If you need to change the curtains at any time or take them down to wash them, this knot style will be easy to undo. An Iron – you might want to lightly iron out any creases to the fabric, which are made when the fabric is folded and inserted into the poly bag.