Joined in 2023 
82 
63 About this deal
The space between the two speakers and the distance from the listener is important. If the speakers are positioned too close or too far apart, stereo imaging will not be fully developed.
If using the optical input, set the source's output to stereo — not surround, Dolby, DTS, or 5.1 — and set the sample rate to 96Khz or lower. Take note of the following behavior and functionality during Bluetooth operation. When you are successfully connected, the Blue LED will be lit solid, and your device will show as connected to 'YU4 by Kanto'. The Audioengine HD3 wireless speaker can connect to any Bluetooth-capable device even from 100 feet away. This works with all types of devices and equipment including old-style turntables, TVs, laptops, desktops, and gaming consoles. Verdict YU4 is equipped with a RCA connector to provide output signal to a powered subwoofer. Simply connect a single RCA cable from the SUB OUT connection on the YU4 to the AUDIO INPUT on your subwoofer. If your subwoofer has a stereo L/R RCA input, either input will work. Set the bass and treble levels to the default setting by pressing the EQ reset button on the remote.YU4 features a high quality DAC (digital-to-analog converter) for the optical inputs that supports data streams up to 24-bit/96 kHz resolution.
We recommend the Kanto sub6 or sub8 powered subwoofer with crossover and volume controls. Most quality subwoofers offer these controls, which allow you to customize the amount of bass you will experience.
🍪 Privacy & Transparency
Verify that the volume of the speaker is not at its minimum level. Turn the volume up using the knob on the front or the volume controls on the remote. Let’s dive into the different features of the YU4 so you can better gauge if this is the right desktop speaker for your needs. Ease of Use – 4.5 out of 5 Thank you for choosing YU4 Powered Speakers, designed by Kanto in Canada. YU4 outputs 140W Peak power into 4 Ohm speakers, for remarkably bold and clean sound. Excellent sensitivity and frequency response provide deep thumping lows and clear, scintillating highs. YU4 is an amazingly flexible speaker system that can accept five input sources and connect to a subwoofer for enhanced low frequency response. Additionally, it is equipped with the latest Bluetooth technology and a USB port for charging your devices. YU4 has a universal input power supply and can be used worldwide from 110V AC to 240V AC.
When connecting audio cables the ON/OFF Switch must be turned OFF. After connecting all cables, the unit can be turned ON. Ensure that the balance setting on the speakers is centered by using the balance reset button on the remote. Many factors will help you say that a desktop speaker is easy to use. First, it should be easy to assemble or install on your PC or audio equipment. Next, it has to provide easy access to cords and cables. Also, the speaker should be easy to adjust with controls at the front or with remote control. Lastly, the speakers should be easy to prop up, install on a bookshelf or wall. The YU4 has power-saving features with its efficient Signal Detection that will automatically place the unit on standby or to power up when in use. Use the knob at the front of the remote control that comes with the speakers. The remote lets you control volume, tone, inputs, and balance when you connect your devices via Bluetooth. Value for Money – 4.8 out of 5 If your turntable does not have a built in Phono Pre-Amp, use the "Phono" setting on the Phono switch.YU4 is designed to perform optimally positioned at least 8" from the rear wall in an average listening room. However, it may not be possible to install the speakers in this position and since rooms vary in shape, size, and furnishing, a certain amount of experimentation is necessary to determine the most suitable position. Set the volume of the source to its highest level. Low source volume can inadvertently trigger standby mode. Verify that the speaker wire is connected to the same color terminals on the active speaker and passive speaker.
Press the Bluetooth button ( ) on YU4's remote to select it as the input source. The Bluetooth LED (blue) will flash to indicate that YU4 is in pairing mode. While the speaker can be paired with more than one device, only one device can play and transmit audio signal at a time.The BT30 from Prosonic is a pair of active Bluetooth speakers. These provide impressive audio sounds coming from any device including your PC, laptop, TV, smartphone, or any Bluetooth-capable device. These speakers feature a modern contemporary style made from top-quality MDF panels with a plastic cover. These Prosonic speakers come with a built-in amplifier, full-range drivers, and silk dome tweeters for impressive audio performance. Audioengine HD3 Wireless Speaker Some models of turntables include a built-in Phono Pre-Amp. If your turntable has a built in Phono Pre-Amp, DO NOT use the Phono setting on the RCA switch. Doing so will void your warranty and could cause severe damage to your speakers. Connecting a Subwoofer
Great Deal 
New Comment