Easy Joint Paving Jointing Compound 12.5kg – Buff Sand

Product Information

Continue to move the jointing compound around the surface filling the joints to 1/8″ below the top of paver or bottom of chamfer. Very fast to use: The use of water to wash and fill the joints between the paving is a breakthrough in jointing methodology. It assists the paving grout to compact into the joints so there is no need to 'strike' or 'tool' the joints unless you want a smooth finish. EASYJoint is the original sweep-in all-weather jointing compound and still the best truly "All Weather Paving Joint Compound". Do not be fooled by other paving jointing compounds making similar claims. Azpects sells tens of thousands of tubs of EASYJoint every month to satisfied customers all over the Europe and North America. Similar to the above systems, paver base panels have drainage holes in them and when installed with High Performance Bedding below, this system allows water to flow through it and into the subgrade following a slope out of the system. • Early or Late in the Season

Some concrete paving is made in moulds and has chamfered edges creating a 'V' shaped joint between two paving slabs, wider at the top than at the bottom. This gap shape can be the most challenging to work with and we recommend you carefully follow the instructions below. At approximately three times the price of polymeric sand, this is not a product that you decide to use after pricing a project. It is not a spontaneous alternative to polymeric sand if on the day of the project it is raining and you then decide to use this as an alternative. It is definitely something you would want to price into the job to ensure that you are not eating into your profits. It also takes about twice the amount of time to install when compared to polymeric sand and is more difficult to install without more than one person. In these applications you are installing a clean stone that has no fines in it. This allows water to permeate through the base material and out of the system whether into the subgrade or through perforated drainage pipes. This free-draining material along with the semi-permeable EASYJoint creates a system that does not hold onto water reducing freeze-thaw cycles. • Synthetic Base Projects Technically advanced: Years of research and continuous development of our jointing compound makes this a market leader. We sell tens of thousands of EASYJoint tubs every month throughout the UK and in Europe.

Demonstration Video

Driveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3.5 tonnes Pre-wet the pavers or slabs and begin to work in small 100 square foot areas to install the jointing compound and pre-wetting the next 100 square foot area when you move onto it. You do not want to install this jointing compound onto a dry surface. I found that the shower or vertical setting on the hose nozzle works well with the installation of this product. When finishing the joints, a jointing tool may smooth out the surface of the joints to give a more pleasant look to the finish. The product should sit 1/8″ below the surface of the paver or bottom of the chamfer, whatever is lower. EASYJoint is the UK's top-selling paving jointing compound, favoured by professionals and DIY installers all around the world. This product was first developed in 2009 and has now evolved to meet user demands and keep up with the latest trends in the industry. The EASYJoint family now has 9 products within the range.

Available in different colours, EasyJoint holds up well against weathering and is incredibly long-lasting on joints that are 3mm wide and over. Once opened, the remaining product can still be used, in turn reducing waste and making the most of your money. Rinse any remaining jointing compound off of the surface of the pavement and any oil residue. You do not want to leave any remaining residue on the surface otherwise it will stain. No Waste: Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2" (50mm) or more of water. – There is no waste with our jointing compound, EASYJoint is an environmentally friendly product. Since beginning our business, we have relied on polymeric sand as the product of choice for our jointing compound. It is not without its cons, but as long as you follow the directions carefully and the conditions are right, polymeric sand is a good option for paver joints. However, there are other choices that have their applications as well. In this article, we will be highlighting a semi-permeable jointing compound from Azpects called EASYJoint. That being said, there is no haze issue that you may get with polymeric sand and it is a much easier product to install in terms of the potential for failure. It is most definitely the perfect product for the applications listed above and in some cases can be superior to polymeric sand as long as the base is free-draining.Smooth the joints: when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool Maintain the Width of Joint Throughout. Maintain at least a 3mm gap width throughout the depth of the paving material. Never have this type of paving butted together. See photograph. The original jointing compound for all weather paving. It can be used rain or shine, at any time with an oustanding finish.