For a trimmer that boasts of having an electromagnetic motor, being able to cut hair at 7200spm (Strokes per Minute) is definitely quite impressive. With that in mind, I wanted to put all the info on these trimmers in one place and compare the Andis Outliner 2 vs T-Outliner to help you figure out which will suit you best. This involves toughening these steel blades with Carbon to ensure that users benefit from the strong blades’ efficiency and also durability. If you are using it as intended, meaning to outline the edges of the hairline or beard, then you’re only using it for a few minutes at a time. Then it rests while you finish the cut and move onto the next one. I find when I am working that I only use the trimmers about every 15 minutes or so. This gives them plenty of time to cool down and I have never needed to use a spray on the blade.

It is still one of the best trimmers for lineups and also arguably among the best trimmers for barbers . Other Cool Features Include: The T-blade setup is the primary difference between these two models. The T-Outliner has a special T-blade which makes it super easy to do perform detailed cuts that the Outliner 2 can’t quite match. Its carbon-steel blades are manufactured to be extra tough and work through high volumes of hair without pulling on it. They’re also quite sharp, so be careful not to sink their teeth too deep in your skin. As well as the new skeleton casing, the GTX-EXO comes with Andis's new GTX-Z blade with a gold coating for superb corrosion resistance. The blade has a pre-set tighter gap than the standard T-Outliner, making it perfect for fine detailing. If you do opt to use pre shave oil, make sure you clean the blade well afterwards. Especially if you will be using these in a barbershop. The fine teeth will easily get gunked up by the oil and hair mixture. As you go, it will slow down to the point that it will have a hard time cutting, so you really need to stay up on this. Hair is quite acidic and will also dull your blade over time if you don’t make sure it is cleaned off.

Because your style’s only as sharp as your blade.

Not surprisingly, the T-Outliner is right up there with the best trimmers on the market. Where it excels above the Outliner 2 (and many others) is in the details, literally. As you can see, we have a grey, hard plastic casing with an attractive switch on the lower part of the body. While there definitely are sturdier models than the T Outliner, it scores above average in this regard. At 5.5″ and 0.70 lbs, it’s a standard-sized trimmer. The model is ergonomic enough to guarantee you a stable, comfortable grip when you start working with the sharp Andis T blade. The T Outliner is for corded use only, coming with a 8-feet long cord. That’s just enough coverage to allow you mobility, no matter if you’re a casual user or a barber. At times, their products are so good that it’s hard to decide which one works best. Many people have run into this very dilemma when trying to choose between the Andis Outliner 2 and the Andis T-Outliner. To ensure smoother hair cutting action, Andis tend strengthen their products’ blades with carbon. The T-blade of the T Outliner trimmer follows the same formula.

It’s important to know that these trimmers are essentially the same but with different blades . Choosing one or the other will depend on what kind of hair cutting you’re trying to do.

More from Mike Medders

For a better sense of the merits and demerits of the T-Blade Outliner, a few comparisons must be made.

Ultimately, the Outliner 2 is a great choice for all your trimming needs, and hits almost all of the right notes when it comes to a great trimmer. Make sure your blades are kept sharp either by sending them out to get sharpened or by sharpening them yourself. Note that some electrical short potential (power) may still return via the neutral, particularly if there are issues with the appliance’s and/or the building’s electrical wiring. Disclaimer: I am not a professional electrician. As such, I welcome constructive criticism/advise from professional electricians. Strong, fast motors with 7,200 SPM. The faster that the blades move, the smoother the cut. Lower SPM motors can actually grab/pull the hair, leaving for user discomfort and, at times, ingrown hairs.If you’ve read through the first part of this article, you know I’m leaning towards the T-Outliner. It does everything one would need, while also providing a little more control over detail work. Especially if you’re looking to do more extensive trims, you’ll find a solid, heavy-duty ready choice here. So, the question here is – are you willing to overlook these flaws. Andis T-Outliner Comparison: How Different Is It From Other Trimmers?