Gyproc Plasterboard Patches various sizes 12 Pack (2 x 50mm, 5 x 100mm & 5 x 150mm))

Product Information

Once the first coat has set if you find any ridges, lumps, bumps or trowel marks, gently scrape these away using the edge of your filling knife, or leave to fully dry before sanding. Time saving and mess free compared to traditional methods of filing a hole with newspaper and building up layers with filing compound Use a digital stud detector to locate studs, noggins and joists in walls and ceiling (Image credit: Getty Images) Can I Use Caulk To Fill Holes? Once the Gyproc EasiFill is fully dry, you may see darker patches – this is where the product is chemically set before it air dries. Once painted, these will completely disappear. It’s always good to finish by giving the entire area a light sand for a perfectly, smooth finish.

Add as much filler as you need to until the hole is filled flush with the surface of the wall. Use the trowel to get the surface as flat as possible. First remove any loose chunks of plaster use a hammer and chisel if necessary then vacuum out the area to get rid of the dust and debris.

The two main repair methods can be found below: Repairing a Plasterboard Hole Using a Piece of Plasterboard or Timber

A range of images, videos and case studies to inspire functional spaces for living, work and leisure. Depending on the shape of the hole, whether its circular or has jagged edges you may need to use a padsaw, jabsaw or hobby knife. Be careful using any of these items as they are sharp and can slip quite easily.Anybody Can Use It - Apply the plasterboard repair patch kit to your wall or ceiling. Once the mesh has bonded, cover over with plaster and smooth out with a scraper. You can then decorate the wall as preferred to make it look like new.

Holes like these are awkward to fix because there’s often a void behind the board so any filler you put in just disappears. This hole came about when a plumber couldn’t decide where to feed the pipes for a radiator. But fixing holes in plasterboard can be achieved easily… To repair a hole in a hollow door, wall, or ceiling, firstly trim the edges of the hole and make is square. Ironically, you actually have to make the hole larger before you can go about fixing it! Feed a batten into the hole and twist it so it is either upright or horizontal and one third of the distance either up or down or across the hole. Make sure you have a 50mm overhang either side of the hole.

Credit limit exceeded

Caulk can’t really be sanded down so you need to get it as smooth as possible. For any larger holes you are much better served by a more suitable filler. How Do You Fill Screw Holes In Plasterboard?