Easy Joint Paving Jointing Compound 12.5kg – Buff Sand

Product Information

Open the container, rip the bag open, and pour it onto the paving surface. Immediately wet the jointing compound. We like to use a mixture of the shower and horizontal setting on the hose nozzle to move the jointing compound around the paving surface. Smooth the joints: when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool

Easyjoint can be used in wet or dry conditions and is sold in a 12.5kg tub which will cover an average of 7m² depending on slab size and joint width. In these applications you are installing a clean stone that has no fines in it. This allows water to permeate through the base material and out of the system whether into the subgrade or through perforated drainage pipes. This free-draining material along with the semi-permeable EASYJoint creates a system that does not hold onto water reducing freeze-thaw cycles. • Synthetic Base ProjectsI found that the shower or vertical setting on the hose nozzle works well with the installation of this product. When finishing the joints, a jointing tool may smooth out the surface of the joints to give a more pleasant look to the finish. The product should sit 1/8″ below the surface of the paver or bottom of the chamfer, whatever is lower. Technically advanced: Years of research and continuous development of our jointing compound makes this a market leader. We sell tens of thousands of EASYJoint tubs every month throughout the UK and in Europe. Similar to the above systems, paver base panels have drainage holes in them and when installed with High Performance Bedding below, this system allows water to flow through it and into the subgrade following a slope out of the system. • Early or Late in the Season Compact the pavers or slabs using a compactor with a protective pad to set them into the bedding layer prior to beginning the installation of the jointing compound. EASYJoint is a very effective, super fast and aesthetically pleasing way to fill/complete joints between paving materials including slabs and pavers for example.

Smooth the joints:when drained and dried, lightly "point" or "strike" the joints with a suitable finishing tool Less Effort: The wash and sweep in application method makes it easy to use and jointing paving is faster than traditional methods At approximately three times the price of polymeric sand, this is not a product that you decide to use after pricing a project. It is not a spontaneous alternative to polymeric sand if on the day of the project it is raining and you then decide to use this as an alternative. It is definitely something you would want to price into the job to ensure that you are not eating into your profits. It also takes about twice the amount of time to install when compared to polymeric sand and is more difficult to install without more than one person. EASYJoint is the UKs top selling paving jointing compound, favoured by professionals and DIY installers all around the world.To further aid this, "point" or "strike" the joint; do not leave it textured. This ensures the top of the filler is below the top rounded edge of the paving and helps it adhere to the base and sides of the paving material. The original jointing compound for all weather paving. It can be used rain or shine, at any time with an oustanding finish. Truly an all weather jointing compound: An all year round hard landscaping product to point your paving that can be used whatever the weather conditions are before, during or after application