Hornit CLUG Bike Rack Wall Mounted | 5 Sizes | Easy To Install

Product Information

While it might be true to have it completely vertical, you would be able to have the bike at an angle. The exact angle depends on the mudguard and how long they are. Once installed, the Clug can be removed easily and relocated in a minute – the insert covering the screws pops out and away you go. Tight spaces I'd say the Clug is the best solution I've tried for keeping bikes in tight spaces. Other solutions often need the bike lifting vertically or sideways to get a hook or arm of some sort engaged, whereas your bike goes straight in-out of the Clug. I have two of these set up in the kitchen of my (very small) flat - they're great bits of kit, and keep two bikes up really well. printers are for prototyping and very complex pieces but they will never be as fast at manufacturing as injection moulding or forging and by their nature can't produce smooth surfaces.

Clug Pro | road.cc Review: Hornit Clug Pro | road.cc

Following on DaSy's excelent suggestion of screwing a toe strap to a wall - Why bother with the toe stap ~ For the ulitimate in striped down simplicity...Why not simply screw the wheel to the wall?I have two of these - instead of fixing directly to plasterboard I used a strip of painted wood with multiple plasterboard specific fixings then screwed these into that. Avoids any chance of pull-out. If you’re using this for long term storage then when you mount the Clug screw a strip of Velcro in behind and use that to wrap around the rim once the wheel is in the Clug. One thing to note: the size of the Clug refers to actual tyre size, not simply stated tyre size, so it's important to actually measure yours as this can vary greatly depending on the width of the rim and the brand of the tyre. Tell us what the product is for and who it's aimed at. What do the manufacturers say about it? How does that compare to your own feelings about it? We designed CLUG to be a great fit with just about every bike tyre out there. We sell five versions of the CLUG - one to fit standard road bike tires between

HORNIT MTB Bike Holder CLUG MTB White - Black | Halfords UK

The Hybrid Clug is spec'd for tyres of 32mm minimum, but when holding a road bike horizontally I found it gripped the 22mm outside-width rim just fine. The 28mm tyre wasn't touching anything, but as all it's doing is providing a tiny balancing force this wasn't an issue. Longer-term storageHow does the price compare to that of similar products in the market, including ones recently tested on road.cc? From the road to the gram, we want to see your Hornit accessories in action. Share your snaps by tagging @thehornit.

Hornit Clug Hornit Clug

We designed the CLUG PRO to be a great fit with just about every bike tyre out there. With five sizes to choose from (identical to the original CLUG), the CLUG PRO range is compatible with tyres between 23-81mm (1-3.2'). And yes some of us do have seasonal bikes and did find them one day all scatered across the garage because the commute bike had a puncture so released itself overnight The only niggle is I chain the bike up, the chain is heavy and the weight has pulled the road bike out of the clip once of twice., you just need to be careful how you position it. For those living in flats or working in offices with scarce space for bike storage, Clugs can be scattered about the place with abandon, ready for any and all bikes to store. I'd say a Clug would make for a handy bike-washing solution, if you are in an apartment situation and need an inconspicuous, low-cost and relatively theft-proof way to hold your bike vertical while washing.

For horizontal use, a mudguard protruding below the centreline of the wheel might cause issues – a soft flap should be fine, a plastic or metal guard would be likely to jam or bend. Maybe experiment with height to get a good-enough hold below the hard mudguard on the exposed wheel section. an average of the other scores: it reflects both a product's function and value – with value determined by how a product I very rarely comment, but this, sorry, 4.5 stars for something that will only hold a bike as long as it's tyre is the correct size, and inflated, and costs twice or more than equivalents?