AUTO-STYLE Universal car mat clips 'StyleFit' - 4 pieces for 2 mats

Product Information

Installed these in a 2018 Ferrari. Great quality and install. Fantastic product for sure. The ones Ferrari installed failed within a couple weeks. Thanks Again!!! " You’ll see that retainer spikes usually have two parts. Unscrew the upper part and leave it aside. Place the spiky part underneath the hole in the mat. Then, put the upper part above it and screw it tightly.

If your new mats don’t have predetermined holes, then you’ll have to make them. Put the mat in place over the hook, and mark where the hole should bed. Oddly enough, the drive side mat had a hole at the seat end of the mat, but there is no hook in the carpet to secure the mat.The ever-popular, multi-award-winning Yaris* nameplate has reached 10 million cumulative worldwide sales, performance which earns it a place alongside Toyota’s illustrious eight-figure achievers – Corolla, Camry, RAV4, Hilux and Land Cruiser I wonder if anyone can help? My IQ is an 09 plate IQ2. Out of the 4 car mat clips 2 have broken and I can't seem to find any appropriate replacements - all the ones I can find seem to be a different design whereby the clip attached to the car through a circular clip on the bottom.

Depending on the type of the floor mat and the vehicle itself, retainer clips can have various shapes. Therefore, they will grip the mat in different ways. Put the mat on a flat surface like the workbench. Then, proceed to cut the holes either with some sharp tool or by placing a small metal tube on the mat and hammering it down. Just make sure that the holes aren’t larger than the diameter of the hook’s head. Retainer Twists

Their purpose is to secure car floor mats in place. You may see them as a way to keep the aesthetics of your car floor intact. However, they are also a safety measure since floor mats that are out of place can get in the way of pedals. There are also hooks used by manufacturers like Lexus. You can install them with less hassle than the previously mentioned ones. All you have to do is to place them on anchor points in the floor and put the mat over them. Retainer Clips

Finally, hit the retainers with a hammer or stomp them with your foot with enough force for the anchor spikes to penetrate the carpeting. Why You Need Car Mat Retainers Once the clip is placed, take your mat and place the hole over the hook on the clip. Push the mat down until it falls into place. Be careful not to push too hard or the hook will break. Also, it’s a good piece of advice to avoid using your foot or a hammer for pushing. You can often find retainer clips in vehicles like Dodge, Chrysler, or Jeep. They secure floor mats by clipping the carpeting and hooking the mat. They are one of the most common ways to secure mats. However, sometimes they tend to be less durable, simply because the clip part can break if you step on it aggressively. How to Install Them They are mainly intended for vehicles such as Jeep, Chrysler, and Dodge. However, since the clip’s anchor point is carpeting and not the floor, you’ll probably be able to use it in cars by other manufacturers. 2. Azerone Car Mat Carpet Clips

Ford Focus - Luxury Mats 2 Clips (SS4718)

The Toyota Prius’s status as the pioneer that paved the way for today’s electrified vehicle market has been recognised with a lifetime achievement award in the TopGear.com Electric Awards 2023 Nowadays, we can’t imagine a vehicle without car mats. They are easily removed; therefore we can change them if they wear off. What’s more, cleaning them isn’t as hard as cleaning the carpet. You can install retention hooks in no time. All you have to do is line up the hooks with their respective holes and then push them into the floor.

My 2006 C6 Corvette had OEM floor mats that were secured by flimsy plastic tabs which snapped over oversized floor posts. The tabs broke allowing the mat to creep forward and bunch up behind the gas peddle. Not good! Infact I think I'm wrong.. Just searched and it looks like they should already be there.. But they are just small slits so look carefully On your carpet Carpet needs 2 small slits made to push clip under.. Then just push together .. Just make sure it aligns with your current matsPut the cap through the hole in the mat, and push the sliding washer, chamfered side up, onto the cap post.