Joined in 2023 
82 
63 About this deal
Inch Color LCD Screen ➤ Unlike most monochrome LCD screen on market, TOPDON BT200 battery load tester is equipped with a 2.4-inch color LCD screen, which is eye-friendly and easy to read even in direct sunlight. Turning ON/OFF any electrical accessories in the vehicle during the test will affect the accuracy of the test result. Steps Basically, if your automotive battery tester’s results are close to Midtronics, then it’s accurate. If it’s not, then it’s not accurate. The testers in this article are all the ones we found on the UK market that have sufficient quality to provide reliable and accurate results for your battery health. How did we choose and rate the best 12V battery testers? Battery healthis measured, by these testers, in CCA (Cold Cranking Amps). They work that out using a variety of methods, such as the inductance method, and putting a resistance across the battery and gauging its response.
Capable of on-board and off-board battery detection without removing the battery from the car, which is an excellent feature for battery dealers and private car owners. Battery health is calculated by comparing the measured CCA rating (computed by the tester during the test, at that time) compared, to the CCA rating of the battery (the CCA value of the battery when it was new). State of Charge (SoC) A Must Tool For DIYers & PROS ➤ ✅TOPDON BT200 battery tester is an upgraded version of the BT100, AB101 and BT20. Applying the advanced conductance testing technology, it can give you accurate testing results in seconds. Fit in your glove box, it's a handy device for automobile factory, garage, auto battery manufacturer, and DIYer.Press "▲" or "▼" to select the correct testing standard (specified on the battery rating label), then press "ENTER" to continue. It’s calculated by comparing the voltage measured during the battery test to the voltage it should be when it’s fully charged.
It came onto the market in 2020 so longevity is still quite unknown. All signs look good though, Topdon are a solid manufacturer. A: Yes. The battery tester will display SOC (State of Charge) to express as a percentage of your battery's rated capacity, a measure of its condition to assess the potential energy. Some battery voltmeters can be very inexpensive, but they tell you only the voltage – that’s not enough information for you to judge battery health. State of Health (SoH)
"+val.title+"
The BT200 battery tester comes with a 2.4 inch color screen. The LCDs make data easy to read, providing you with a more comfortable visual experience during every inspection. Japan Industrial Standard, displayed on the battery as combination of the numbers and letters, e.g. 55D23, 80D26
TOPDON BT200 will test each battery according to the selected actual system standard and rating marked on the battery, to get the accurate results. Before Test A: The battery tester will display SOH (State of Health), SOC (State of Charge), CCA (Cold Cranking Ampere), Voltage, Internal Resistance, and Rating, with an intuitive test result of "GOOD" or "BAD" for your reference. If the internal resistance is too large, it indicates a broken battery.Most batteries have a CCA reading written on the battery but if not, you can Google your battery and find out the CCA value..
Great Deal 
New Comment