Drayton DIGISTAT +2 22084 24 Hour PROGRAMMABLE Room Thermostat

Product Information

What should be done when E1 appears on the screen of a room thermostat. Does the whole wireless system need replacement?

To swap between Heating and Hot Water on the thermostat press the setting button (cog symbol) to open this open.A room thermostat controls the heating in your home. If the room's temperature drops below your chosen temperature, the thermostat will switch on. Once the room has reached the chosen temperature, the thermostat will turn the heating off, preventing overheating and reducing energy consumption. This can help reduce your home's energy consumption. Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. How do you boost? Typically 30M, however building construction and materials may effect this. Signal strength test should be carried out. These batteries are factory fitted and not designed to be user replaceable. Unauthorised removal of the battery could damage the unit. TRVs

The actuator head of a ACL Lifestyle 2-port motorised valve (679H308-30L1) has failed. Is it still possible to get the actuator for this valve to avoid draining the whole system? Green Premium is the Schneider Electric eco-mark that brings more value to our customers and more growth to our company. The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: The TRV is liquid filled this gives a fast response to temperature and provides a greater temperature accuracy.Preset 3 provides heating all day long How is Digistat suitable for visually-impaired tenants/homeowners? This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons. day programming: The most flexible option allowing you to schedule every day of the week independently.

These settings appear in the installer menu and it is important to select the setting for your heat source: gas boiler (default), oil boiler, heat pump, or electric heating

Digistat+3 RF

Manual thermosta:This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons.

In either mode the radiator or tap icon will be displayed. How do I change from Automatic to Manual mode? Thanks to comprehensive information about our Green Premium products, our customers can make more sustainable, environmentally conscious decisions Pairing with your Digistat – can’t see the pop-up? The Digistat remembers the last BOOST so if you always use the same parameters just press the O button once. Simple! Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers? No, E1 is an error code that means the internal sensor has failed. The sender unit will have to be replaced.

Digistat+ RF

If the valve is a 15, 10 or 8mm angled body then it can be fitted in either flow/return, horizontally or vertically. If the valve is in the ‘Heating’ only position when the room thermostat becomes satisfied, then the valve will remain energised consuming some power and may be warm to touch. This is normal. Programmers Our Green Premium eco-mark encompasses a broad range of environmental criteria, meeting and exceeding international regulations and industry standards: The Green Premium eco-mark stands for complete, transparent, and easily available information about products