Dylon Washing Machine Fabric Dye Pod Intense Black, 350g

Product Information

Set water temperature to the hottest possible setting and a wash cycle of at least 30 minutes or longer. The longer the item is in the dye, the darker the color will be. Wearing rubber gloves, mix powder or well-shaken liquid dye with 4 cups 950 mL of very hot water. Stir well. We do not recommend using a front loading washing machine to dye extra large items or multiple items.

In a separate container, dissolve 1 cup 240 mL of salt in 4 cups 950 mL of very hot water if dyeing natural fibers like cotton or linen. If dyeing silk or nylon, mix 1 cup 240 mL of white vinegar with 2-4 cups 470-950 mL of hot tap water. Colour doesn't seem to come off on anything, washes out of machine well and is always a huge success. The dye is fairly expensive though, even when on offer, so need to assess if it's worth buying three pots for an old pair of jeans or buying new ones. Certainly not worth it for a few old bras unless making it up with other stuff, you end up with loads of little things the same colour, makes for an interesting washing line. If you are dyeing synthetic fabric (i.e. fabric containing more than 35% polyester, acrylic or acetate), then you cannot use this method. Due to the complexity of dyeing synthetics, you must use the stovetop method to maintain an almost boiling temperature for the duration of your dyeing. Shake liquid dye bottle and mix dye with 4 cups 950 mL of hot water. Powder dye should be pre-dissolved in 2 cups 470 mL of hot water. Add diluted dye to the basin.

Disclaimer: With so many generations of washing machines in the market, it’s difficult to pin point a precise process as it differs across brands. Please follow these instructions as a general guideline and use at your own discretion.

Martin Lewis: Do you have a Power of Attorney? It’s crucial protection – not just for the elderly – and more important than a will Set water temperature to the hottest possible setting and a wash cycle of at least 30 minutes or longer and start the cycle. NatWest, Royal Bank of Scotland (RBS) and Ulster Bank, which are all part of the NatWest Group, will now shut at least 172 of their bank branches in 2023 and 2024. To enhance the color and reduce color bleeding, use Rit ColorStay Dye Fixative immediately after dyeing and before washing, following these instructions. Items should be in the dyebath for a minimum of thirty minutes to a maximum of one hour before the rinse cycle begins. Use an extended setting, or reset the setting before the rinse cycle starts to extend the wash time. Note that the longer the item is in the dyebath, the darker the color will be. For bulky items, such as draperies or large slipcovers, we recommend stopping the wash load periodically to detangle and unwind the item. This will help prevent uneven dyeing and lighter areas from forming. Remember to wear rubber gloves when handling the item mid-cycle.NatWest, RBS and Ulster Bank to close at least 172 branches in 2023/24 – here's the full list, plus alternatives Pour the dye solution into the dispenser. Then, pour the salt or vinegar solution. Flush the dispenser thoroughly with 4 cups 950 mL more of hot tap water. If you are dyeing with children or in a poorly ventilated area, you will want to consider what chemicals are in or need to be added to the dye you are using,” Olsen says. Otherwise, tie-dying can pose potential hazards to children when there's no adult supervision.