Versatile: Parallel cuts up to 280 mm; cross cut width of up to 450 mm. Angled cuts from -2° to 47°. Mitre angles from -70° to +70°:The angle can be optimally adjusted via the exact scale; predefined catches also make selecting the most important angles easier. Angle cuts from -2° to 47° (-10° possible with limited cutting depth of 21 - 32 mm) thanks to the swiveling saw blade

Practical: at up to 35 mm cutting height, even angle cuts down to -10°; ideal for undercutting fitting frames Powerful: The brushless EC-TEC motor with high speeds of 6800 min-1 guarantees fast cutting progress and perfect cutting results Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital display.Powerful: The brushless EC-TEC motor with high speeds of 6800 rpm guarantees fast sawing progress and perfect cutting results Highly precise angles: The miter gauge is optimally aligned and centrally clamped via a groove on the sliding table. For miter angles between -70° and +70° Flexible underframe: The UG-CSC-SYS underframe is the perfect solution for transport to the point of use and the ideal worktable in one. Work appropriately for the material: With saw blades for nearly every material; speeds appropriate for the material can be preselected via the digital display Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital display

Angled cuts from -2° to 47°:Angled cuts from -2° to 47°; at a cutting height of up to 35 mm, even down to -10°. The 2x18 V dual battery system in combination with the brushless EC-TEC motor will impress you with its power and torque – you won't notice any difference compared with mains-powered machines.Exact height and angle adjustment by means of electric stepper motors. Can be set precisely to 0.1 mm and controllable via a display