Dremel EZ SpeedClic SC456 Metal Cutting Wheel 5-pack, 5 Cutting Wheels with 38mm Cutting Diameter for Rotary Tool

Product Information

Now the Dremel will start cutting and sparks will fly mostly in the direction of the cut. Cutting is slow compared to cutting wood, just keep on applying some pressure, let the tool do the cutting, keep a steady hand and be patient. 8. Finish The Cut Dremel rotary cutting tools are commonly used in DIY applications, especially in art and craft, woodwork, etc. Is the Dremel suited for cutting metal, though, and which bit should you use to achieve this? I don’t recommend using Dremel on extremely hardened steels because it shortens the durability of the Dremel and the cutting disc.

Choose the right attachment for the job at hand: for thin cuts, use the EZ409 Wheel; for tougher materials, use either the EZ456 Fiberglass Reinforced Wheel or the EZ506CU Premium Metal Cut-Off Wheel. Both are good cutting wheels. Get the first one if you need to perform random cuts; the second one is more durable, so get that if you are planning to use the Dremel a lot for this kind of activity. Put on safety Goggles/visor, Cut-resistant gloves, Hearing protection, Clothes that cover, and steel toes shoes. 2. Secure Metal Piece in A ViceEasily Fits into tight spaces and produces less dust. You will get a thin and perfect line cut with these wheels. Cons: After finishing the cut, sometimes we don’t pay attention to organizing the equipment and its accessories. This kind of careless act can reduce the durability of your favorite Dremel. If you don’t know the material you’re working with, stop and reassess your project. Different Kinds of Dremel Cuts for Metal A Dremel can be used for a wide array of projects and tasks, ranging from cutting to grinding to polishing. When it comes to working with metal, the same applications apply: Cutting

There can be burrs or rough edges after the cut. You can use sandpaper or a grinding stone to smooth out the edges. Dremel 4300 is the best for cutting metal. With its high-performance motor and 5000-35000 RPM, you can cut all kinds of metal with ease. Conclusion You can also use it to cut grooves into stripped screws and nuts, enabling you to remove them using a flathead screwdriver.Whether you’re cutting sheet metal into different sizes or altering a hole size, both cutting and grinding tools can leave jagged edges behind. Even if you’re careful, a sheet metal cut can leave a nasty wound. As a general rule, sheet metal refers to steel, either galvanized or stainless. This metal is safe to cut with most commercially available cutting tools such as Dremel attachments. With the same cutting tools and safety gear, you can also safely cut copper. You can cut thin steel with Dremel high-performance cutting wheels. For steel cutting, 35000 RPM is the recommended speed. Do not exceed the RPM limit. Cutting metal with a Dremel is quite straightforward. Once you choose the right attachment and set up the project correctly (especially safety-wise), the rest is self-explanatory. If you use some common sense, you shouldn’t have any problems. Aluminum is a soft metal with a low melting point of 1,221 degrees Fahrenheit ( 660°C). When cutting aluminum with abrasive wheels, it could generate excessive heat and result in gumming up the wheel. This could shatter the cut-off wheel and damage the workpiece.

But when it’s about small steel tasks, Dremel will do the work. There are specific Dremel cutting discs to cut steel. After cutting, your project might be as good as it is. On the other hand, if there are any undesired sharp edges, use a grinding bit to smooth things up. It might also be a good idea for safety reasons if you need to handle the metal piece afterward. Final Thoughts “muahahahaha” by Robert Couse-Baker is licensed under CC BY 2.0 While this blade isn’t suitable for hard metals, such as steel, it will work well for cutting soft metals, like aluminum. Now you are ready to start cutting. Hold the Dremel securely in one hand while turning on the power of your Dremel. 7. Start Cutting SlowlyThis is important because if there is any rust, it will break off as soon as you start cutting. So, you won’t get the desired precise cut. You can cut steel with a 38mm cutting disc. But the 38mm Diamond Cutting Disc will be the best option for cutting all types of steel, even the hardened ones. An even better option is to use a jigsaw or circular saw fitted with a non-ferrous metal cutting blade. Speed for Cutting Metal Use a two-handed golf grip when handling the Dremel cutting tool. This offers you greater control over the tool and minimizes the risk of injury.