Innokin T20-S Prism Tank + 2 x Coils included ( 1 pre installed ) (Black)

Product Information

This is a definite MTL coil, quite restricted airflow – but it could do with a slightly tighter draw to satisfy a smoker. Featuring a 1500mAh built-in battery and an 18W maximum output, the Endura T20S offers a consistent vape and battery life to support a whole day of vaping on a full charge. The lower capacity battery is a bit shorter in length. Both batteries have the same diameter and functions. How Does the Innokin Endura T20-S Starter Kit Perform? I used the bulgy type drip tip the most – a straight one is also supplied. I didn’t think I would like the bulgy one but I love it! The Battery: Proving to be a reliable and simple tank, the Prism T20-S was the perfect choice for this kit. It can hold 2ml of e-liquid and is compatible with any flavour you like. Thanks to the removable top section, you can refill it without having to dismantle the entire tank. If you’re looking for less vapour and inhale that’s similar to a cigarette, we recommend the 1.5 Ohm Prism S coil and either a 50/50 or high PG e-liquid. For slightly increased vapour production, the 0.8 Ohm coil and a 50/50 e-liquid will work best.

The coil simply pushes into the tank – make sure to align the cut outs and push the coil firmly into place. An old coil is removed by simply pulling it out from the tank. Lithium Ion batteries are safely used in millions of devices around the world, every day. As with most high energy devices, there are various risks that users should be aware of when using them. Batteries can pose a fire risk when, over-charged, short-circuited, submerged in water or if their casing is damaged. Although many Lithium Ion batteries are protected, therefore it is vital that you still take the following precautions, as the protection circuit is a potential safety mechanism as opposed to something that should be relied upon. What are battery mAh and amps? I have also tried the tank on another mod on its own to see how the tank performs. 0.8 ohm Prism S Coil The Innokin Endura T20S vape kit is a simple starter vape kit that we can recommend for users of all experience levels. Combining a 1500mAh built-in battery and an 18W maximum output, it offers consistent vapour production and battery life to support a full day of vaping on a full charge. This kit comes complete with the T20-S vape tank that uses sub ohm coils but produces a small amount of cloud for mouth to lung vaping. This is a top fill tank which I prefer. I did find there is little to grip to unscrew the top cap – you often end up removing the mouthpiece instead.

Innokin Endura T20 S Tank Key Features

A 0.8ohm coil is of course a sub ohm coil but it runs at a lower wattage than what you would use with a ‘true’ sub ohm tank that is designed for Direct to Lung vaping. For instance, I use a sub ohm tank with a 0.4ohm coil at 30-40W. If you shop around you can get 6mg 80% VG E-liquid I have a few different brands with this strength. My favourite is the Stika Bombz fruit salad which comes in 10ml bottles and 6mg strength. Sadly due to the TPD regulations any bottles bigger than 10ml will be usually 0% nicotine. I tend to stay away from these myself. Made from stainless steel and Pyrex glass, not only does the T20s Prism tank look the part, but it can also withstand all the bumps and scrapes of everyday life. Built to last, this is one tank you can rely on. Top-filling system I had some leaking problem, but it was because I wasn't assembling the tank together correctly. FYI: always screw the bottom ring on without the drip tip screwed in, THEN screw the drip tip in Also make sure that the coil is inserted correctly. Otherwise it may leak from the air holes.

I did find however I kept pressing 5 times to turn on and off as this is the norm for most E-cigs! How To Fill The Prism T20-S TankI started off using the 0.8-Ohm coil. Using one of my favorite 50/50 juices I started vaping at the dull blue 16 W. Nice flavor, slightly warm vapor, and a decent amount of clouds. Playing around with the wattage settings, I found that the coil will even handle 30 W. Although, I wouldn’t recommend doing it for a longer period. It will decrease the lifespan of the coil. My personal preference with the 0.8-Ohm coil is 18 W.