JUMPERS

Product Information

offers the same high quality sound, plus the facility to upgrade. Also available with advanced signal processing for enhanced sound capability, it features both IDE and Creative/Panasonic CD Rom interface."

Following the success of the CT2260 and its first ViBRA-16 card, the CT2800 or Sound Blaster Vibra 16S, uses an updated chip - the ViBRA 16S (CT2504). Board revision 29409 was the original CT2770 and still had the other CD-ROM interface solder pads for Mitsumi and Sony drives, plus the CSP/ASP chip solder pads. The CT2740 was a "Value Edition" card. It pre-dates the "earliest" 2nd-gen SB16, the CT2230. Note the CT1747 chip did not yet have the "OPL" licence logo on it - this is most likely because Creative had not received permission to put it on there from Yamaha at the time this board was made.Despite the model number, the CT2700 is still a 1st-generation card, being almost identical to the CT1740 and CT1750 cards, except that it gets only a Mitsumi CD-ROM interface. More Images Whether you're heading to the office, meeting friends for a casual outing, or enjoying a cozy evening at home, the CD Jumper is a stylish choice. Pair it with jeans for a relaxed yet chic look or dress it up with tailored pants for a more polished ensemble.

The Sound Blaster 16 Value is perfect as a low cost solution to crystal clear CD quality sound. It features the new IDE interface for connection to any compatible CD-ROM drive. Sound Blaster 16 Value edition. Most of these have the CT1978 CQM FM synthesizer chip which is almost universally considered poorer quality than a true Yamaha OPL3 chip (some CT2980 cards have the original Yamaha chip which is preferable). If it has the Yamaha chip instead, this is one of the lowest-noise SB16 cards you will find. The CT1703-TBS is apparently decent for noise (low) and is also found on the CT2290, AWE32 and AWE64.Regardless of whether your card is PnP or not, if you cannot find the original driver disk, or don't want to have the hassle of lots of utilities to initialise your card, you can try UniSound from Vogons member JazeFox - it's a simple utility that detects and initialises your card, making it ready for action. It works on SB16 cards including all the ViBRA-based ones, AWE32, AWE64, as well as many other manufacturers sound cards such as those with OPTi, Crystal, Analog Devices, Yamaha YMF71x, ESS1868/1869, and more! It is designed to work on systems from old 8088/8086 XTs up to Pentium-era and beyond.

Creative Labs introduced the 2nd generation of Sound Blaster 16 cards in 1994, starting with the CT2230. The key difference from the 1st generation is that the Yamaha YMF262 was now gone as a discrete chip. Instead Creative Labs integrated the YMF262 into their own chip called "CT1747". These chips got the official "OPL" logo stamped on them, as they did contain the Yamaha circuitry inside. Also sadly gone was the hardware thumbwheel volume control. The least noisy of the Sound Blaster 16 second-gen cards are the CT2940 and CT2980 with an embedded Yamaha YMF chip. These have the CT2502 (ViBRA) chips and are Plug & Play. CT2230 / CT2239 The Sound Blaster 16 ASP comes with a powerful mix of applications, including two programs for sampling in Windows. WaveStudio is limited to sampling and editing what will fit in system memory (about a minute of 44 kHz sampling). If that's enough, you'll enjoy its intuitive interface and strong editing capabilities. Soundo'LE is the appropriate application for creating longer samples and embedding them into OLE-aware applications. The Sound Blaster 16 mixer, which you can access from Soundo'LE's menus, is very powerful and easy to use."InfoWorld, 11 Jan 1993 The MPU-401 interface on the 15-pin game/MIDI port continued to be non-standard (the pinouts differ from the Roland standard).With its timeless design and clean lines, the CD Jumper exudes elegance and versatility. It can be easily dressed up or down, making it suitable for various occasions and outfit combinations. We recommend when installing a CD-R (compact disc recordable) or CD-RW (compact disc re-writable) drive that the drive be set up as the primary drive on the second IDE/EIDE interface. Having the drive as the primary helps prevent buffer underruns when creating a CD. Attach cables addition if realistic sound synthesis is important. However with the daughterboard installed, you can't use the adjacent slot). The CT2291 is the "Value Edition" version of the CT2290. These do not support having a CSP/ASP chip. These cards also only have an IDE connector - no 'Creative/Panasonic Drive' connector. If you are using Windows 9x, ME, 2000, or XP, and if the drive is installed correctly, it should be detected automatically and installed when the computer first boots up.