Dell WYSE 5070 1.5GHz J4105 1200G Black - Thin Clients (1.5 GHz, J4105, Intel Celeron, 2.5 GHz, 4 GB, DDR4-SDRAM)

£404.66
FREE Shipping

Dell WYSE 5070 1.5GHz J4105 1200G Black - Thin Clients (1.5 GHz, J4105, Intel Celeron, 2.5 GHz, 4 GB, DDR4-SDRAM)

Dell WYSE 5070 1.5GHz J4105 1200G Black - Thin Clients (1.5 GHz, J4105, Intel Celeron, 2.5 GHz, 4 GB, DDR4-SDRAM)

RRP: £809.32
Price: £404.66
£404.66 FREE Shipping

In stock

We accept the following payment methods

Description

With the widest range of vendors on the market, you can enjoy the most complete VDI support with certified VDI brokers like Microsoft, Citrix and VMWare. Hard drive retention: Hard drive retention is not available on models with a soldered hard drive, including XPS 9315 2in1, Chromebooks or Venue tablets, except the Venue 11 Pro. After I disconnected from the virtual desktop, I pinged the Leostream connection broker and found that the round-trip time (RTT) was 98ms. Given the fact that the Leostream connection broker and virtual desktop were in an AWS datacenter located on the East Coast, and I am on the West Coast, I was surprised to find that a virtual desktop with this much latency performed just as well as a virtual desktop that was hosted on-premise. For this test, I copied a single large file from a fileserver elsewhere on my network over an CIFS mounted share. copying at over 750Mbps

A wide range of operating systems: Stay covered with Windows 10 IoT Enterprise, Wyse ThinLinux or Dell's exclusive Wyse ThinOS: a highly secure malware-resistant firmware solution. As I’ve mentioned a few other times, this is basically gigabit on my network. And what was the CPU doing during this? 70% on a single core with a speedtestTerms Apply. Promotion ends 3 December 2023. Items are subject to availability. Max 5 units per customer. One difference between them lies in the integrated graphics: The Celeron supports Intel UHD Graphics 600 The real test of a virtual desktop client is its usability. To test the usability of the Wyse 5070, I used the client for three weeks with various configurations. Below are the key results during my time using the client.

Het systeem wordt automatisch opnieuw opgestart en werkt het BIOS bij in het welkomstscherm van het systeem. Nadat de BIOS-update voltooid is, wordt het systeem nog een keer opnieuw opgestart. LAN can see DMZ and Internet, certain DMZ hosts (my phone, laptop) can see some stuff on the LAN, and IoT can see nothing but the Internet. On the ThinOS desktop in the lower left corner, there is a settings icon that navigates to a menu that is used to configure the device, with options including: screen configuration and display topology, networking, displaying information on the operating system of the Wyse 5070 (Figure 11), and the ability to perform other activities for the device. I used the settings menu to configure the topology of my monitors and set the DHCP server for the device, and I found the menu easy to navigate and intuitive. The Wyse 5070 unit that we received from Dell was equipped with the Pentium chip, 4 GB GDDR4 RAM, Intel UHD Graphics 605, an AMD Radeon 9173 PCI-e graphics card in the extended chassis, and a 64GB SSD drive. ThinOS version 8.5 was preinstalled on the device.

Unmatched flexibility. A single platform.

eMMC storage. I’m pretty sure I could just install straight to this, but for now I wanted to leave it intact in case I wanted to play with ThinOS. Though I do know that it’s generally recommended to skip eMMC storage for anything that might do lots of writes, like a firewall logging a bunch. Dell is positioning the Wyse 5070 as a highly-configurable virtual desktop infrastructure (VDI) client platform. The Wsye 5070’s configuration ensures its functionality is suitable for a wide range of situations, from being a basic VDI client for task workers to being one that supports the most demanding of workloads. More specifically, the Wsye 5070 has 21 ports for connectivity, supports five different OSes, two different CPU families, many different memory and storage configurations, and all common remote display protocols. Additionally, it can be configured to support up to four 4K monitors and two 2K monitors, thereby satisfying the most demanding of users. With about ~70% usage on a single core out of four, this little J5005 doesn’t do too terribly. File Copy – CIFS The reason the choosing a thin client was power consumption, the APU drew about 6w in normal operation and the 5070 pulls about 15w but with PCIe NIC and an M2 SSD. Plus a lot more CPU grunt. Towards the left, you see the blue USB internal header that could be used for an internal USB drive.

After using the Wyse 5070 client for three weeks with both on-premise and cloud-based virtual desktops, and using a wide variety of configurations, I found the device to be an extremely powerful and well-built VDI client which is easy to configure and could handle any load that I put on it; it has connectivity for the most demanding of environments via its 21 ports and support for six monitors. Wyse has a reputation of building devices that are built to last, and I see that this device is no exception to that. PF kept throwing some weird errors about the MMC controller timing out. I initially installed on it, but it kept hanging on boot (would get there eventually) but didn't feel comfortable putting it to work with that on the go. I did see some other posts on the BSD and Netgate forums about other MMC controllers and Netgate Xeon-D appliances doing this, but no confirmed resolution I could see.and the 'extended' (wide) item - Regulatory model N12D. There are also two CPU options. The size/type In this review, I’ll give an overview of the Wsye 5070 VDI client’s specifications, and design and build of the extended chassis, based on the model that we received from Dell. Then, I’ll outline the testing on the device I carried out over the span of three weeks and the key findings from those tests. Lastly, I’ll provide some final thoughts about the device and briefly discuss who would benefit most from purchasing this product. Wyse 5070 Specifications *Although specifications will vary depending on configuration, here is a general overview of Wyse 5070’s specifications Manufacturer

PCIe NIC shorted out on the case, needed to bend a bit of the card cage out of the way to stop it shorting on the solder pins of the NIC. Improve your efficiency with the Intel Gemini Lake Celeron QC processor and 4GB DDR4 RAM option, or amp it up with the Intel Gemini Lake Pentium QC processor, 8GB DDR4 RAM and discrete graphics in an extended form factor. Plus the USB 3.1 Type-C and dual-band wireless features help maximize your performance. Accidental Damage-Additional Information: Accidental Damage Service excludes theft, loss, and damage due to fire, flood or other acts of nature, or intentional damage. Customer may be required to return damaged unit to Dell. Limit of 1 qualified incident per contract year. For more information, consumers visit Accidental Damage Service Contract (Consumer) or commercial customers visit Accidental Damage Service Contract (Commercial). The highest usage I saw was during boot where it hit a whopping 15 watts. Oh, and I’m dangling an additional SSD off a SATA wire to use temporarily as a boot drive since I was doing other testing with this server, so that 5.7 watts includes this guy: sata wire

One platform. Every need.

With the power to see up to four 4K displays and two 2K displays at once, you can construct the ultimate setup option that best suits your content. The 5070 was announced in May 2018. My example has no manufacturing date on it but the Wyse support



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop