Hammerite Paint Direct to Rust Exterior Red Metal Paint, Hammered Finish. Corrosion Resistant Red Paint and Rust Remover, 8 Year Protection - 250ml Tin 1.25 SqM Coverage

Product Information

Specially formulated to provide a heat resistant finish on any water-filled household radiator and hot water pipes. We’ve recently relaunched our metal paint range! The all new and improved Granville Metal Paints come in two great finishes - hammered and smooth - and a huge variety of sizes and colours.

We hope to deliver to these areas in the future, however the cost is prohibitivley high for us at this time. We apologise for any inconvenience. For use on both metal and wooden garage doors. Hammerite Colours – Garage Door Paint Hammerite Radiator Paint Colours Well, the short answer is that these are only available through colour mixing booths. You can find these at Hammerite mixing desks in DIY stores but unfortunately, I don’t have a list of locations for you. Hammerite Colours – Smooth Colour Mixing Hammerite Satin Colours This is a subtle satin smooth finish that provides a low sheen alternative to Hammerite Smooth Finish. As is to be expected from Hammerite, this is a durable, corrosion-resistant decorative coating for ferrous and non-ferrous metals. Hammerite Colours – Metal Paint Satin Hammerite Ultima Colours This is a smooth gloss finish that will retain its sheen for years. As always it is a durable, corrosion-resistant decorative coating for ferrous and non-ferrous metals. Hammerite Colours – Metal Paint Smooth More Smooth Colours – MixingHammerite Aerosol Metal Paint is specially formulated to perform as primer, undercoat and topcoat in one. It gives the metal a subtle hammered effect with a metallic sheen. Hammerite Colours – Spray Paint Hammered Satin Finish Spray Paint Durable, corrosion-resistant decorative coating for ferrous and non-ferrous metals. The decorative hammered appearance is smooth to the touch and sheds water well. Hammerite Colours – Metal Paint Hammered Hammerite Smooth Colours Working days are defined as Monday-Friday 8am-7pm inclusive, excluding Saturday, Sunday and Public Holidays. For applications where a hard, durable, metallic finish is required. Wrought iron, cast metal parts, tool boxes, machinery, instruments etc Surface Preparation Buying a hammered dulcimer from Red Cow Music could not be easier.All our instruments are fully setup before leaving us,so should arrive with you in ready to play condition.

Coo-Var Hammercote Hammered Finish is a premium quality durable coating which provides a glossy hammered finish. As a rust resistant coating Hammercote provides a long lasting finish for metal, ironwork and many other suitably well prepared surfaces. This coating is fast drying and suitable for interior and exterior use. Hamemrcote is highly versatile being convenient and easy to use. Ideal application temperature 8°C to 25°C. Lightly stir before use. Do not mix vigorously.Brush application: Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur. Next Day Service: AB10-AB16, AB21-AB25, AB31-AB32, AB39, AB41, AB51-AB52, DD10-DD11, FK7-FK21, KY99, IV1-IV20, IV30-IV32, IV36, IV63,PA21-33, PH3-PH13, PH15-PH26 Please note that during particularly busy periods, it may take a little longer to receive your delivery and our carrier may attempt to deliver to you on a Saturday. Faster Delivery Stir the paint thoroughly before use, and apply with a good quality brush. A narrow brush is best for use on railings. A broad is best for use on bigger metal object, like a garden table.

Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush.Remove dirt, dust and grease with diluted detergent. Rinse with clean water and allow time to dry.Paint a test patch of Hammerite Direct to Rust Metal Paint Hammered onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint Hammered directly to surface.If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint Hammered.On bare zinc, aluminium and galvanised surfaces apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint Hammered If the metal was already painted, wash down thoroughly with diluted detergent, rinse with clean water and allow to dry. So there are all the different types of paints you will find included on this list. We also show the colours available for the barbecue and high heat paints under spray paints.

If the objects are made from bare zinc, aluminium or galvanized metal use Hammerite Direct to Galvanised Metal Paint. All of our products are of Brand Ne Condition and shipped to customer as received from the supplier/manufacturer.

Product Tags

Hammerite also offers primers but we haven’t included those in this mega guide as they are intended to be painted over. As such the colour is not that important! To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options. If your car is your pride and joy, give it a home to be proud of with Hammerite Garage Door Paint. Specially formulated for use on metal doors, it provides a beautiful gloss finish that’s highly resistant to flaking and discoloration. Easy to apply to vertical surfaces and sag resistant.