Innokin Prism T18E Tank 2ML + 2 x 1.5ohms Coils (Rainbow)

Product Information

If you're experiencing a burning taste when vaping, it's likely that the coil in your Innokin Endura T18E needs to be replaced. Over time, coils can become worn out or damaged, which can lead to a burnt taste when vaping. Here are some common reasons why you might be getting a burning taste from your coil: The tank had the Ultem colour drip tip installed which looked super ugly and spoiled the look of such a pretty kit. this is slightly warmer and quite dry I would imagine this setting would result in a lower coil life. Not as enjoyable as the 12.5W setting. Innokin Endura T22 Pro Coil Summary Replacing the o-rings on your T18 II tank is actually quite a simple process. The first step is to remove all e-liquid and the coil from your atomizer. Next, you’ll want to fully disassemble your atomizer, making note of where each and every o-ring is placed. In general, most Innokin atomizers have two large o-rings place within the glass section, one upper o-ring and one lower o-ring. A smaller o-ring found near the base of the drip tip is common as well. When fitting in your new o-rings, be sure to apply a decent amount of pressure so that they are quite snug. Do not use too much force, as you can tear or deform your o-ring which can cause leakage or fitment problems. If you are having trouble finding where a specific o-ring is placed, try giving the atomizer you’re using a search on YouTube for a disassembly and reassembly guide. Please note that all Innokin atomizers come with pre-installed o-rings, and those bundled with the tank are spares. this feels like a huge jump from 9.5W setting and the flavour and throat hit increase a lot. Still feels like it is crying out for a little more power!

The kit includes the T18E tank, an 18mm diameter, 2ml capacity top-fill tank with Innokin Prism coil technology for an outstanding flavor profile that stays true to how liquid manufacturers intended. Below the power level LEDs is the power adjustment button, this has the same silver finish as the fire button and you press and hold this to change the power level.I was possibly expecting a bit too much from the 1.5Ω coil, in my mind I was thinking ‘if the 1.7Ω is this good the 1.5Ω must be mind blowing’. I was in for a slight disappointment though, it was still superb but not as superb as the 1.7Ω, but the vape was noticeably different.It’s more like a traditional MTL RTA vape, or should I say a top quality MTL RTA, I would be proud of a build like this in my DIY tanks. The brand new model in the brand’s best-selling Prism range, the Innokin Prism T18E Pro tank is a dream come true for MTL vapers - novices and experts alike! The refillable tank’s sturdy stainless steel and pyrex glass design is built to last, while its 510 threaded connection makes it compatible with a wide range of vape devices.

for me this setting with this coil is the optimum performance for the whole kit I love it. Plenty of flavour, plenty of throat hit and a good warm vapour. At times this felt a bit hot if I didn’t have the drip tip in my mouth far enough – so if you find it is too warm put the tip a bit further into your lips to shield them. Man that whole sentence just sounds like filth… Tanks with high resistance coils perform better with nic salt. This is because they produce less vapour so require a stronger liquid to deliver a quality throat hit with great flavour. TECC Titan pairs perfectly with MTL vape tanks because of the high PG content. This allows it to be absorbed easily by the coil as well as delivering a sharp throat hit. Sadly the airflow is not adjustable for this kit so the airflow provided will depend only on the coil installed. From simple starter vape tanks to the more powerful sub-ohm e-cigarette tanks, there are plenty of diverse vaping options available, each enabling a different vaping experience.

The standard 510 drip tip connection meant I could use other 510 drip tips on here and I love my own pink one coupled with the Rose Gold kit!

Filling was effortless,the top section simply slides over to reveal the fill port.There was plenty of room to get your tip in (that’s what she said!) and the mechanism is firm enough that it shouldn’t accidentally flip open.Even if it did flip open, the silicon bladder should prevent it spilling. Operation Below the fire button are the 4 power level LEDs – these light up according to which power level you have set, again these are clear and bright.I quit smoking cigarettes by using disposable vape bars, but I read some bad things about disposables, so I wanted to invest in a simple vape kit. Buy this kit, some delicious nicotine salts and the 1.6ohm coils and this should help anyone prefer vaping over smoking. Install a new coil making sure the straight edges in the coil base align with the straight edges in the tank as shown. In fact when I first looked at it I wasn’t even sure if the base screwed off like previous versions as it looked to be all one piece – epic design and quality!