These type of standard suits are usually referred to as inflatable catsuits or simply latex inflation suits. They are a classic, sexual piece which can easily find a home in any kinkster’s fun-filled toybox. If you’re new to inflation and want to give it a try, we recommend starting out with one of these suits to get a feel for what elements of inflation arouse you the most.

The last commonly seen type of inflation suits and accessories are those inspired by real-life situations in which inflation is used. They are most typically used by individuals with a sexual interest in roleplay, and can help a sexy scenario become even more immersive than ever before.Because most ball-body suits cover the head, they are usually fitted with one or more breathing tubes so that the inflated partner receives a sufficient amount of air throughout. Inspect the suit frequently to make sure that the breathing tubes are working properly and are not clogged or dirty. They should also be thoroughly cleaned after every play session to avoid any buildup of dirt, grit or bodily fluids. As the inflated partner will likely be unable to speak, establish a “safe-gesture” which they are capable of performing while in the suit. It is important that even a fully bound, sense-deprived individual have some agreed-upon method of communicating a desire to slow down or stop at any time. When most people think about latex, they associate it with words such as sleek, shiny, and tight. A “standard” catsuit or enclosure suit snugly embraces the body, highlighting and emphasizing every curve and angle of the human form. Read over the scenarios described above again and ask yourself – other than the shared “inflation” theme, what do they have in common? The answer is that most of the dreams of your average inflation fetishist must remain confined to the realms of fantasy, erotic literature and roleplay.

Inflation is a fetish which overlaps with many other sexual interests, including but not limited to latex, balloons, food or stuffing, liquid play, and the adoption of dominant and submissive roles. The core element of the inflation fetish is the idea of something, usually a human body but also sometimes a suit or object, growing larger and larger as it is filled with air, water, food, or other similar substances. Therefore, inflation of clothing has been adopted by many fetishists as a safer, cheaper substitute with far fewer long-term negative effects. DIY solutions include putting inflated balloons underneath an oversized T-shirt or sweater; however, if you truly wish to turn your inflation dreams into reality, purchasing a custom latex suit or other accessories is recommended. If your suit, hood or mask contains breathing tubes or breathing holes, make sure to clean them out after EVERY play session. This will avoid the risk of the tube becoming plugged by dirt or bodily fluids so that air can no longer pass through it. If you are wearing this type of suit and feel as though you are unable to get enough air, stop play IMMEDIATELY. In this scenario, the larger partner, despite their limited control and range of movement, can take on a dominant role due to the sheer power which their new size grants them. They can do anything from cradling their smaller partner in between their enhanced breasts to squishing, crushing or even consuming them (a sub-fetish known as vorarephilia or vore) to further add to their massive size. Always, always, ALWAYS establish a safeword or safe gesture that means STOP before engaging in play. A person wearing an inflation suit is often unable to move or remove the suit on their own. It is extremely important that they always possess the ability to signal for an immediate stop, even if their face and full body are totally covered by the suit.The answer lies, as discussed in many of the above sections, with sensory deprivation and sensation. Inflatable blindfolds have been found to be even more effective at removing the sight than the standard “strip of cloth” style, due to pressing more tightly against the eyes and creating an unbreakable “seal”. In addition, many submissives find the tight, massage-like pressure against their eyes to be comforting or arousing. While most inflatable hoods feature the typical fully round ball shape, it is sometimes possible to find one which is more oval or head-shaped, if you prefer to have you or your partner resemble an inflatable sex doll or toy. After this inner “skin” comes a second, somewhat looser layer of the same latex. It is this outer layer which undergoes the actual process of inflation. It is here where the differences between variant types of inflation suits can be observed. On the other hand, some dominants prefer the slower inflation process a pump provides, as it allows them to observe every change in their partner’s body in great detail. A hand or foot operated pump also gives the non-inflated partner the greatest amount of control, as how much air is pumped into the suit is entirely up to them at all times.

Said partner is able to assume a dominant role, controlling the “inflatee” in any way they so desire. They can even control how large they become as they take on the role of the one “stuffing” their submissive partner – whether with air, food, water, or anything else they choose. If this is the image you have of latex, the idea of an inflatable suit may seem random at best and contradictory at worst. Rather than clinging tightly to the shape of the body, an inflatable suit “puffs up” when gradually filled with air. The result is similar to the round “sumo wrestler” suits often seen at carnivals or sporting events or the bulky, air-filled garb worn by astronauts exploring the Moon. The most commonly found type of access suit features two zippers, one which can be unzipped to expose the genital area and one the anus. This allows for manual or oral stimulation or penetrative sex to occur while using the suit to engage in inflation play. In addition, these zippers can be used for more mundane purposes, such as allowing the suited partner to use the bathroom if a play session goes on for a long time (although forcing you or your partner to “hold it” can add an intense new element to your play – the Laidtex staff definitely recommends giving it a try!) Cleaning, storing and repairing an inflation suit can be done in the same way as you would with a more standard catsuit or gimp suit. Head over to our thorough latex maintenance guide here to learn more!However, it is also possible to find inflation suits which provide access to other areas of the body. For example, a large chest zipper might allow you to stroke or fondle your partner’s breasts, while a pair of small flaps might limit your chest access to only their extremely sensitive nipples. There are even access suits with long front or side zippers allowing you to put on and take off the suit without any assistance – perfect for solo play sessions! In addition, many kinksters cite a connection between inflation and the wide, varied world of size difference fetishes. Those into inflation often fantasize about a person becoming amazingly, impossibly large, while their partner remains human size (or perhaps even shrinks). What do we mean by this? Well, it’s very physically difficult to inflate a person. You can make someone’s belly bulge out a little by having them eat several hearty meals or drink a large amount of water. The stomachs of pregnant individuals can become even larger than that, but the pregnancy period is usually accompanied by pain, discomfort and illness. Some “pumps” also exist which can be safely used to slightly enlarge certain parts of the body, usually the breasts, for a short period of time, but the effects last no more than a few minutes or hours. The inflatable blindfold can be paired with an inflatable catsuit for full-body bondage play. However, it can also be enjoyed even by those who are not themselves inflation fetishists, because of its effectiveness in cutting off the sight thoroughly and entirely.