Timber Spikes. The metal spikes in particular can be used to fasten heavy pieces of timber wherever you might need them as an edging for synthetic turf. If you don’t face the grass the correct way, you’ll always be able to see where the join between the two pieces of grass is. First, hammer with strong pressure to drive them through the grass and soil but not all the way through, i.e., leave an inch or two without driving them in. For further information on using a sand infill, please read our previous article, ‘ Should You Use a Sand Infill for Artificial Grass? We Reveal the Truth’.

Solution: Unroll your artificial grass on your lawn and allow it to acclimatise for a minimum of 24 hours.

Mistake 5: Using sharp sand as a laying course

Keep in mind; you’re spending a fair amount of money on materials. If you don’t take care in following the proper steps and paying attention to the details, you’ll have nothing but a sloppy-looking DIY job to show for it. Plus, poorly installed synthetic grass will be more prone to weathering and damage and may prove to be a waste of time and money. When you first hear about firm ground cleats, you may assume they are the same as hard ground cleats. Break up the ground and remove unwanted weeds and shrubs. Your best bet is to use a motorized turf cutter to remove the existing turf efficiently. If you do not have access to one, however, a regular garden spade can serve as a handy (albeit time-consuming) alternative. Each piece of grass will also feature a couple of bare rows without grass at the edges. This is known as the “selvedge”, which helps prevent the roll from unravelling in transport. This will be removed later when trimming the grass pieces to size. There are many reasons why you might want to buy artificial grass. Perhaps, you want to turn part of your driveway or patio into an attractive and functional lawn? Maybe, you wish to create additional outdoor space for your children to play in, or you’re tired of battling to keep your existing grass looking its best? If you have a shady garden, you may be struggling to make natural grass take hold. Whatever your needs, we have many types of artificial grass that are sure to suit you.

Soft ground cleats are perfect for players during the Fall or Spring months where the ground may be softer. To install turf nails, you will need a turf nailer, which is a special tool that helps to drive the nails into the ground. But if you are going to go ahead with a DIY installation, then hopefully you’ve found this article useful in helping you to avoid potential pitfalls.If your lawn is made up of one piece of artificial grass, you may skip directly to Step 9. If you require multiple pieces, you are now ready to make the final trimmings at the joining edges.

Remember, the installation will last for several days if you can get a few good friends to commit to the entire process, great! If not, make sure you secure enough help on the days you’ll need it most, such as when you’re removing the natural grass. Give Yourself Plenty Of Time But for now, let’s just assume you’ve chosen to install the artificial lawn yourself. You’re ready to move on to step 2! Step 2: Gather Your Materials And Make Plans

What Type of Nails Do I Use for Artificial Grass?

For example, soccer cleats designed for hard ground will have much shorter studs than a soccer cleat designed for soft ground.