VLAND LED DRL Head Lamps R+L For IS250 IS350 IS220D IS300 2006-2012 Headlights Assembly,With Sequential Indicator (Clear RHD(Driver is on the right))

Product Information

Remember, unless you disconnected them earlier from behind, electrical wiring harnesses are still attached.

The "K" for instance in "8000K" represents the certain bulb color temperature output, and it's the abbreviation for the word Kelvin. If water collects inside your headlight to the point where puddles form, odds are you’ve got a crack in the headlight lens cover. If they were very faded, there is point by which they are too far gone to refurbish, but normally if they just started yellowing/fading then it should be good for many years. I trust your judgement, since you have used them on a 2010 model IS 250, just wanted to be sure that they'll work if I disable the auto leveling feature. Set your OEM headlamp assemblies aside, in the event that you wish to reinstall them one day, for example, if you decide to sell the vehicle.

Took about a month to get them in since they are coming from China but I’ve been overall happy with the look and quality. Whether it be aftermarket or OEM, Navan products are notably DOT / SAE (USA, Asia) certified, and equip many vehicles around the world. Even if you’ve removed one or more connectors from the rear of the assembly before unbolting it, there may be others (such as separate wires to side marker bulbs) still attached which were previously obscured. A lot of our cars came with HID from the factory and the headlight assemblies come with built in ballasts so it’s likely you did have them. Headlight comes with Projector Headlights which provides the maximum beam output while increasing your visibility.

Navan headlights, rear lights and blinkers combine safety and reliability, with a modern design, thanks to the use of LEDs and sequential turn signals. This condition is made worse by high outside humidity, and by colder outside temperatures during winter months.Bi-Xenon” means high and low beam are both genuine xenon HID, but the real (OEM Standard) bi-xenon is that the Low and High Beam uses the same xenon bulb and ballasts in the same projector which that projector has an electric controlled shutter built in (in front of light bulb but behind the glass projector lens).

Begin to adjust the low beam using the adjusters on the back of the headlight assembly so the beam shines 3. and then you would have to glue the lens back in place with same glue which again easier said than done. Using high brightness LED lamp beads, the streamer follows your left and right direction lights, staged a unique streamer show. To minimize condensation buildup inside the headlight, make sure any dust boots or covers are on tightly.Some 2006 Lexus IS250 headlights can fit IS 350 models from 2006 to 2012 and ISF models from 2008 to 2013. If you did this, you’d need to find a good place to zip tie, 3m dual sided tape, or some way to secure the ballast to the car somewhere to minimize movement and potentially disconnecting. They can also be found underneath the vehicle where the bumper cover meets splash shields and near the edge of wheel well openings where wheel well liners meet fenders.

Wide-ranging upgrades have strengthened the appeal of the Lexus UX 300e, the urban crossover launched three years ago as Lexus’s first all-electric model. If you have purchased lamps without any additional lighting elements like halos or LED lights, you are done with the electrical installation.Vland warrants its products to be free from defects in materials or workmanship for a period of 1 year.