Squeeze the bulb or press down the plunger of the desoldering pump and place it on the molten solder. Take another piece of 0.6mm sterling silver sheet sized 25mm x 30mm and planish it onto the doming stake, hammering in circular rings from the middle working outwards until the sheet is lightly domed.

Monument Sweatbox | Toolstation

When you have unintentionally soldered metals and electrical components on a board or want to use the components for a different purpose, then you have to desolder to remove them.The soldering tip tinner is made of mild acid and is used to prevent the oxidation of the soldering iron tip when you are not using it. Besides, you can also use it to remove the residue after soldering. You have to insert the soldering iron tip into the tinner and then wipe it with a damp sponge or cloth. This will remove the residue and prevent oxidation of the tip. 11. Wire Cutters Apart from PCBs, you can also use the mini vise to hold pieces of metal or wood. PanaVise is a popular brand of Soldering Vises. Conclusion Desoldering is the process of melting the solder and removing the joints made between two materials. Each box comes with a main tech gadget (the primary focus of the box) plus two mini tech gadgets (not as flashy or impressive but still fun and useful). Some boxes are destined to be way cooler than others, but overall the experience evens out to be worth the price.

Soldering Photo-Etch | Scale Models Forums Soldering Photo-Etch | Scale Models Forums

However, you need to ensure that you have all safety accessories to ensure that you have a safe soldering experience. First, you have to depress the tip of the pen to saturate its flux. Then press the tip against the areas where you will solder the electronic components to apply the solder. 4. Solder Seal Wire Connectors Besides the equipment, you also need certain tools to perform soldering. These tools are responsible for preparing the materials before soldering and cleaning the surface after the process.To sum it up, the desoldering process is used to melt the solder and remove the two soldered materials. By using the correct tools and methods, you can remove the components without damage and reuse them. Every box comes with a hands-on project that teaches you a new scientific concept (e.g. electric motors, mechanical forces, materials science, etc) and forces you to think like an engineer as you apply those concepts.