The CombiSave can be fitted to most combination boilers and helps people to save money on their energy bills and reduce carbon emissions. It means that even more households can now take advantage of the savings that CombiSave can generate.” Thanks for your comments and our chat just now. It’s really refreshing to see a manufacturing engaging in debates about their products. Two rotatable elbows ensure it can be used on a range of 15mm pipe configurations and it does not affect a boiler’s warranty. CombiSave is an innovative and award-winning British creation that’s designed to significantly reduce the amount of water and gas utilised in the heating process so homeowners can save time and money and help the environment at the same time.

The TEDDINGTON COMBISAVE 15MM CSA0003 is a genuine, brand new Teddington Systems product, covered by a Teddington Systems manufacturer's guarantee. Regardless of how huge your house is, you will only need one CombiSave per boiler. I already have a CombiSmart. Will I still need a CombiSave? So would turning the tap on a bit achieve the same things as the CombiSave?? Would you get fed up waiting? Does it matter if you are close to the bolier? David from Combisave points out, in a earlier comment to this blogpost, that you will save more in winter than in summer monhs as the incoming water temperature is much lower in the winter months, so takes longer to warm up. Hence your savings will be more in winter with a Combisave installed. The Potty Puma method works differently from a CombiSave in that the Potterton Puma valve did not save water.

Yes, it does work on the same principle as turning the hot tap slightly until the water is hot. But as stated, it would be unlikely that everyone in the house and their guests could be trained to do this each time accurately. Also you can’t regulate the flow on some appliances such as washing machines and showers. Just as we buy remotes for TVs but we could do that manually too! A CombiSave is a simple valve that monitors the temperature of your water. If you have a Combi boiler and find you spend a lot of time waiting for your water to heat up to the right temperature, a CombiSave could be a good solution for you. They're also a good idea if you're on a water meter as they'll help you save water and lower your bills as a result. Why do I need a mains water switch or Surestop? Small changes to the internal workings of the device – which include redirecting the flow of water – mean that it now works more efficiently in areas of high water pressure.

As my boiler's up in the loft the preheat function runs quite often because it's cooler and in winter before I fitted the timer it would preheat a couple of times every hour wasting gas and electric. Each CombiSave needs to be tuned to each boiler to get the best savings (Temperature and flow rate adjustments) so you could possible improve on performance. Hi, I’m from Mole Group, I saw on here people talking about CombiSave. It’s great that our product has got people talking! I just wanted to answer a few of the questions raised... CombiSave comes preset at 45°C. This can be adjusted by the fitter +/- 5 degrees centigrade as required. The savings are only a half to a third less in the summer as the incoming mains water is some 10-15 degrees celcius warmer than in January. (so you could double your savings roughly)

Our other products for water saving and protection

CombiSave is a valve which help you reduce the amount of water and gas used in the initial heating process, saving you time and money, and helping the environment. The Nest scheme is part of the Welsh Government’s work to reduce the number of people who are struggling to keep their homes warm and cope with high utility bills. That’s the good point – the bad point is that if the internal ‘pre-heat’ tank is shut off the boiler, which floor-mounted in the airing cupboard, cannot be used for airing purposes – heap big problem for wife!

Heating and plumbing specialists Parr and Evans, which has more than 25 years of experience of providing heating systems to people in the Bristol area, now advise most customers – where appropriate – to fit a CombiSave. A central heating system filter is a small, yet powerful device that fits by your boiler or in your airing cupboard. It captures damaging debris and sludge from the water in your heating system and prevents it from entering your boiler and causing damage. It'll protect your boiler and radiators and help the heating system to last longer and work more efficiently. Why do I need a Powerflush? CombiSave is a thermostatically operated valve set to become an essential add-on for new and existing combi boilers.CombiSave is recommended by both the Water Regulations Advisory Scheme (WRAS) and Waterwise, and can be fitted in less than 20 minutes as part of a normal boiler service or repair. Kenny Maxwell, Sales Manager at Teddington, said they decided to design a new model following talks with customers.

And don't forget that CombiSave maintains the outlet temperature of the water all year round,so no more luke warm baths with smaller boilers. Kenny Maxwell, Sales Manager at Teddington, said: “We’re delighted to have this partnership in place. The pilot programme at the end of last year was very positive and we’re looking forward to working with the Welsh Government over the next 12 months and beyond. If you have a combi boiler, it can take at least a minute for hot water to get to the right temperature. That’s a total wait of 21 hours annually! With a CombiSave however, you can dramatically cut your wait time by as much as 50 percent!

Limescale control and water softening products

So, given the information you have provided, I would suggested that a Combisave could be a good investment for you. I will alert David Combisave to your comments and see if he wants to add anything. Designed to combat the fact that even brand new A-rated boilers waste water, gas, time and money every time you turn on the hot tap. The CombiSave is an award-winning British innovation that can help you reduce the amount of water and gas used in the initial water heating process, saving you time and money, and helping the environment. By making some relatively minor design changes we’ve created a robust valve that now works more efficiently in areas of high water pressure over prolonged periods. CombiSave works by automatically controlling the flow of water every time a hot tap is turned on – allowing the boiler to heat the water faster and only returning the flow to normal once a usable temperature is reached.