Router Mode : Deco works in router mode by default. In router mode, please note that the satellite Deco should be wired to the LAN port of the main Deco or a switch connected to the main Deco's LAN port to avoid a network loop. Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms. Use of WiFi 6 and other features including OFDMA, MU-MIMO, 1024-QAM, HE160 and BSS Color require clients to also support the corresponding features. The 160 MHz bandwidth may be unavailable in the 5 GHz band in some regions/countries due to regulatory restrictions.

Number of ports: Select the number of PoE ports according to the number of your PoE-powered devices.

The Deco X50-PoE is an upgrade on traditional AX3000 mesh WiFi, with two built-in PoE/WAN/LAN auto-sensing ports that open more possibilities. The highlight of the Deco X50-PoE is its flexibility. It lets you install, power, and access the internet exactly as you need. Put your Deco anywhere you want PoE+ Injector 【 TL-POE160S 】 https://www.tp-link.com/us/business-networking/accessory/tl-poe160s/#overview General Troubleshooting For DDNS on a TP-Link Wi-Fi Router, LTE Gateway Router, or Deco Router 05-31-2023 26483 If we run tests and get unusually low numbers, we change the channel to get better speeds. Neighboring networks typically use channels 36–48 on the 5 GHz band, so finding one in the upper end (149+) is better for testing. The bad news is, in most cases, you can’t change the channel on a mesh system—as is the case for the X50-PoE. That means you may see better or worse speeds than those we recorded—it depends on the radio noise surrounding your network. Confirm the total power consumption required by all PoE-powered devices does not exceed the switch’s overall power budget.

Transmission rate: For faster speed, a gigabit switch is recommended (Deco X50-PoE has a 2.5G port, you can also buy a switch with a 2.5G port). Uses of WiFi 6 and other features including OFDMA, MU-MIMO, 1024-QAM, and BSS Color require clients to also support the corresponding features. It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade. Hardware specifications: Deco X50 Outdoor vs Deco PX50 vs Deco X50 PoE Deco X50 Outdoor: The most versatile Deco yet Why did I receive a new device connection alert when a known device joined the network? 06-25-2023 54948

Compare the Deco X50-PoE to the competition

The total power required by all PoE devices should not exceed the PoE switch’s overall power budget. Otherwise, the powered devices may be unstable or even unable to be powered on. Although it is an X50 product, the TP-Link Deco X50-PoE will work with any existing Deco system, so it’s not just for people buying from scratch. Klienti potřebují podporovat 802.11k/v/ra mohou vyžadovat další nastavení. Výkon se může lišit v závislosti na klientském zařízení. We test router speed by setting up each router in an office and connecting it to a local test server. Then, we transmit test data between our wireless devices and the server, taking numerous measurements to account for fluctuations in Wi-Fi speeds.

That said, the Deco X50-PoE is an investment. You start with the kit, and then you also need to install a switch and all the cabling needed to take advantage of PoE. If you want to expand your network outside, TP-Link provides weather-resistant models too. So, when you get right down to it, the Deco X50-PoE is ideal for business. The number of POE ports: Select the number of PoE ports according to the number of your PoE-powered devices. Gbps internet speedsrequire compatible service plans and equipment. All WAN/LAN ports will operate as either WAN or LAN ports. Only one port can serve as a WAN port at a time.

Setup Video

Multi-Gig 2.5 Gbps PoE Port – 1× 2.5 Gbps port + 1× Gigabit port offer high-speed data transmissions. The Deco X50-PoE is designed to be placed on a surface or mounted. It comes with accessories for wall and ceiling mounting. Gigabit 48VDC Passive PoE Adapter 【 TL-POE4824G 】 https://www.tp-link.com/us/business-networking/accessory/tl-poe4824g/ As with the other X50 products, the TP-Link Deco X50-PoE is an AX3000 Wi-Fi 6 device. It has a 5GHz band rated at a maximum of 2402Mbit/s and a 2.4GHz band rated at 574Mbit/s. I connected my TP-Link Deco X50-PoE to an X50-5G. IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

Deco devices allow for flexible installation to meet various scenario demands. Place it on a tabletop or install it on a ceiling or wall with the adaptive accessories. The exceptional performance with a compact design ensures simple WiFi installation while saving space. The Deco X50-PoE’s design perfectly blends into various home decors. AX3000 Dual-Band WiFi, Ideal for Non-Stop Entertainment Gbps internet speeds require compatible service plans and equipment. 2.5 Gbps and 1 Gbps ports cannot be concurrently configured as WAN ports.Voor het gebruik van wifi 6 en functies zoals OFDMA, MU-MIMO, 1024-QAM, HE160 en BSS Color zijn clients vereist die deze functies ondersteunen. De bandbreedte van 160MHz is mogelijk niet beschikbaar op de 5GHz-band in sommige regio's/landen vanwege wettelijke beperkingen. Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port, the rate supported by the network cable, Internet service provider factors and other environmental conditions. The internet connection is unstable or suddenly stops working when connected to the Deco network? 07-12-2023 845353 Transmission rate: For faster speed, a gigabit switch is recommended. (Deco X50-PoE has a 2.5G port, you can also buy a switch with a 2.5G port) Router Mode: Deco works in router mode by default. In router mode, please note that the satellite Deco should be wired to the LAN port of the main Deco or a switch connected to the main Deco's LAN port to avoid a network loop.