Mounting and adjusting TV can be a breeze if you know the proper way. Loads of videos on YouTube may show certain techniques, but they apply to specific brands of TVs. This is where my method is unique. It did happen that the TV casing was slightly deformed when I took the mount off (see pics attached), it seems the casing receded in a bit, I was a bit surprised with this since I barely had tightened the bolts originally. :S The most crucial point of mounting your TV is finding the sweet spot. Your viewing angle greatly affects your TV-watching experience. If you are looking for the TV mounting method with a spacer, you can settle here. In this article, we will be discussing how to use spacers on TV mount.

If you want to complete the process smoothly, you have to keep the essential tools near your reach. These tools are, This is just from our engineering experience as a recommendation. I would use the spacers you have to fill the gap if you want to prevent damaging the TV. Drill the spots where the studs are 16-24 inches apart. Screw the wall plate here, and make sure it’s perfectly secured. Otherwise, your TV may fall off. 5. Mount The TV Mounting the TV is easy now. Just slide in the spacers in the slot of the wall plate. Call a friend if you have a large TV.You can use a strap on the wall plate of the TV mount. They are really cheap and are simple to use. Final Verdict: You already know what a spacer is. It’s a stand-like structure to hold TV on the wall. In other words, the spacer’s purpose is to keep the TV mounted.

So, what do you mean "prevent pulling the fixing out of the TV" ? It seems to me the fixing should be the strongest structural point. Rather, you think it This is worth doing, i know you're sceptical. We have speaker stands where you screw a 4mm steel plate to an insert in the end of a piece of tube, if you don't fill the gap with the spacer provided then you can loosen the insert and/or bend the plate. If you have a regular sofa set up in front of the TV, mount the TV 42” from the floor. Use a tape measure to determine the distance. Still confused? Try this free height finder tool. It’s pretty effective. 4: Attach Wall Plate On The TV SpotHum, that's why I didn't tighten the screws too much (or much at all actually, I stopped when I couldn't tighten anymore without exerting force). It seems to me that this is almost the equivalent (in terms of physics) of not having the spacers (because the space is there), with the exception that if the TV would be tilted for whatever reason, the weight of the TV might pull the fixings towards the arm. :S To alter the length of the fixing screws. If the long screws supplied are too long and the short screws are too short you can use the spacers to tweak the long screw length to suit your TV.

Once you have all the tools nearby, you can proceed to the next step. 2. Attach The Spacers To Your TVHi again. Yeah, I took your advice and remounted the TV, with 5mm nuts instead of spacers (5mm is enough space for the TV casing recession). When I said in my previous post "or can it be a bolt for example" I actually meant nut instead of bolt, I doubt that was clear. And that's what I ended up doing. Thus they need something to cover the gap between their angled surface and leveled surface of the wall. This is where the spacer comes in handy to eliminate this gap. Get the wall plate attached there once you know the perfect position for your TV. The wall plate will mainly hold the TV in position. Grab a stud finder, and determine the wall studs. Studs are basically the frame of your home that holds the wall together.