Lightly sand the surfaces you need to glue. This will help the super glue to form a stronger bond. Once you’ve done that, coat one surface with a thin layer of Loctite’s Super Glue Glass and hold the parts together until the glue has set. If you're looking for a professional-grade windshield repair kit, Tri Glass offers several different products to consider. The company's basic windshield repair kit is a lot more comprehensive than other offerings on our list, but should only really be used if you have the knowledge and experience with these tools. Another reason to opt for one of these kits is if you're considering a side job or hobby of repairing windshields. For old-fashioned windows, put the new pane of glass in place and insert several glazing points in place to hold the glass. For newer windows, put a bead of silicone around the edge of the trim from the outside. Be careful to put the silicone as far from the edge of the sash as possible so that it doesn’t ooze out onto the new or repaired glass once it’s installed.

Make it fit. Examine the parts to be joined and test the fit. Do the surfaces fit closely, with no gaps? Clear away any extra fragments or glass particles obstructing a perfect seal. If you do find gaps between glass pieces, opt for a gap-filling adhesive such as Loctite Extreme Glue Gel.You have a handful of options to fix it: You can get a new windshield, which will cost you an arm and a leg, you could use the services of a professional glass repair company, which would cost you half a kidney, or you could use a DIY windshield repair kit. Remove any excess glass glue using Loctite’s Glue Remover, and gently cut away any unwanted sealant with a sharp knife. Make sure to remove any glass chips, dirt, or other debris from the now empty sash so that the new piece of glass fits in correctly. Carefully remove the entire broken pane of glass. Depending on the window, you might need to gently pry away the trim holding the glass in place or remove the glazing putty that’s holding it in. If the window is held by glazing, it’ll also have glazing points. These are small, metal pieces with sharp points pushed into the wood to hold the window in place. You can carefully remove these with a screwdriver.

In a well-ventilated area, prepare a two-part epoxy on a piece of cardboard or a disposable plate. These adhesives (which can be found in many craft stores or home improvement centers) have a separate resin and hardener that are mixed together at the time of use. There are many glue products on the market, offering a variety of components and uses. Choosing the right glass glue for the job from the start is the best way to avoid headaches, and it can keep your glass valuables looking brand new.While standard household super glues can work well for bonding wood, metal, or other common surfaces, using them for repairing glass isn’t always recommended. These glues can work as temporary fixes, but they often have low resistance to moisture and ultraviolet light. When used on glass, they can come apart with cleaning or general use. For glass-based repairs, look for specialized glass glues. Keep it clean. Begin with a clean, dry surface that is free of oil, wax, paint, or any type of soapy residue. Any excess material, even fingerprints, might prevent a strong bond.